Polyurethane Automotive Topcoat 6000 (Two-Component)

Polyurethane Automotive Topcoat 6000 (Two-Component)

Product Introduction:

The coating film of this product exhibits excellent color and gloss retention, providing outstanding durability for outdoor applications and offering long-lasting protection for equipment. It is highly recommended for use on bridges, truck bodies, heavy machinery, road cleaning equipment, agricultural machinery, papermaking machinery, and other similar equipment. The coating ensures enhanced decorative appeal and durability for your industrial assets.

Product Features:

1.This product exhibits excellent light and weather resistance.

2. This product can withstand certain levels of water, oil, acid, and alkali.

3. This product features excellent gloss, hardness, and adhesion.

4. The coating exhibits slow yellowing and chalking when applied outdoors.

Construction Reference:

Surface Preparation

Surface Treatment – Before painting, the substrate surface should be clean, dry, smooth, and firm, free from oil, rust, and other contaminants. If there are issues such as oil, old paint film, or weld burrs on the steel surface, mechanical methods should be used for treatment (if possible, sandblasting or shot blasting should be applied to the steel surface for rust removal), requiring a standard of Sa2.5 or higher (Sa3.0). For surfaces already coated with primer, topcoat must be applied within the recoating interval. Avoid applying the topcoat immediately after the primer or leaving the primer for more than 7 days before applying the topcoat. If the topcoat is to be applied after more than 7 days, the primer should be sanded before the topcoat application.

Dust Removal: Use a compressed air gun to blow it clean or sweep it with a clean brush.

Old paint film treatment - Use a scraper to remove and then fill and sand smooth, or adopt other methods as needed.

Grease treatment - First clean with a diluent or handle by other means, then wipe with a clean cloth. If conditions permit, first wash with dilute acid, rinse with clean water, then air-dry or oven-dry.

Construction conditions

The suitable application temperature for this product is between 5°C and 40°C. The relative humidity must be below 85%, and application should be avoided during rain, snow, or fog. Contact with water is prohibited. Ensure adequate ventilation during application and drying in confined spaces. The application surface must be dry and clean, and the substrate temperature must be at least 3°C above the dew point before coating.

Construction Method

The recommended construction method is air spraying. If other coating methods are required (such as high-pressure airless spraying or roller coating), please specify in advance. The company will adjust accordingly to ensure the coating effect is guaranteed.

Compatible Products:

Polyurethane Automotive Topcoat 6000 can be paired with our company's Polyurethane Automotive Primer 1001 and Polyurethane 3100.

Intermediate paint, epoxy primer, epoxy intermediate paint. For custom matching, please consult our product center.

Coating Data:

Mixing Ratio—Refer to the marked ratio on the packaging as the standard.

Thinner - Eco-friendly Thinner

Dilution Ratio - Generally 10% to 30% of the paint volume used

Pot Life - Use within 4 hours after mixing at a temperature of (23±2)°C. The pot life typically halves for every 10°C increase in temperature and doubles for every 10°C decrease.

Curing Time - Mix components A and B in the specified ratio for approximately 5-10 minutes before application, then allow to cure for 5-10 minutes before use.

Spray gun pressure—4-6kg Tool cleaning—Environmentally friendly thinner

Emergency response:

To avoid contact of paint with skin and eyes, wear protective clothing, gloves, goggles, and masks before construction. If paint splashes onto the skin, immediately wash it with warm water, soapy water, or an appropriate cleaning agent. If it gets into the eyes, rinse thoroughly with plenty of water and seek medical attention promptly.

The construction site should be well-ventilated, and an air mask must be worn during spraying to prevent inhaling solvent vapors and paint mist. Do not pour the paint into sewers or drainage pipes.

This product contains flammable substances. Keep away from open flames during storage and application, and smoking is strictly prohibited at the construction site. The product should be stored out of reach of children.

Storage:

Storage must comply with national regulations. The storage environment should be dry, cool, well-ventilated, and away from heat sources and open flames. Packaging containers must remain tightly sealed.

Note:

Please carefully read the relevant product manual. If there are any uncertainties, promptly contact our company.