Bright alkyd anti rust paint (single component)

Product Overview

This product is a glossy alkyd anti-rust paint formulated with resin, pigments, extender pigments, driers, and organic solvents. It features high gloss, excellent rust-proof performance, and the dual characteristics of combining primer and topcoat into one layer, making it simple to operate and convenient to use. It is mainly used for coating steel structures as an all-in-one primer and topcoat solution.

Product Features

1.The surface finish of this product depends on the application method; avoid mixed application methods as much as possible.

2.Multiple coats are required to achieve the specified film thickness.，Pay attention to the coating interval time.

3.This product must be used with alkyd thinner.

Coating Data

Color

Fully Dry

Mass Solids Content

Typical Dry

Film Thickness

Theoretical Coverage

Actual coverage rate

Coating Method

Various colors

7d

≥70%

Dry film 50-60μm

3-5㎡/㎏

Appropriately account for paint loss

Air spraying, brush coating

Application Guidelines

Surface Preparation — Before painting, the substrate surface should be clean, dry, smooth, and firm, free from grease, rust, and other contaminants. If there are issues such as grease, old paint flakes, or weld spatter on the steel surface, mechanical methods should be used for treatment (preferably sandblasting or shot blasting for rust removal if conditions permit), aiming for a standard of Sa2.5 or higher (Sa3.0).

Dust Removal – Use a compressed air gun to blow it clean or sweep it with a clean brush.

Old Paint Film Treatment – Remove it with a scraper, then fill and sand it smooth, or use other methods as appropriate.

Oil and grease treatment—— First, use a thinner to remove or treat with other methods, then wipe clean with a clean cloth. If possible, first clean with dilute acid, rinse with clean water, and then air dry or oven dry.

Construction Environment — The optimal application temperature for this product is between 5°C and 40°C. Relative humidity must be below 75%. Avoid application during rainy, snowy, or foggy weather, and prevent contact with water. Ensure adequate ventilation in confined spaces during both application and drying periods. The surface to be treated must be dry and clean, and the substrate temperature must be at least 3°C above the dew point.

Construction Method - Air spraying or brushing. If special application methods (such as airless spraying or roller coating) are required, please specify in advance. The company will adjust the formulation accordingly for special methods.

Dilution ratio—Generally 5-10% of the paint quantity used

Spraying pressure—0.3~0.6MPa

Tools Cleaning—Alkyd Thinner

Drying and Recoating Intervals

Surface Drying Time

Hard Drying Time

Handling Time

Full curing time

Recoating interval

8 h

24h

72h

7d

24h

Recommended complementary products

Bright alkyd anti-rust paint can also be paired with our company's various colors of alkyd ready-mixed paint and alkyd enamel.For alternative pairings, please consult our technical center.

Health and

Safety

To avoid skin and eye contact with the paint, wear protective clothing, gloves, goggles, and masks before application. If paint splashes onto the skin, immediately wash with warm water, soapy water, or other appropriate cleaners. If it enters the eyes, rinse thoroughly with plenty of clean water and seek medical attention promptly.

The construction site should be well-ventilated, and air masks must be worn during spray painting to prevent inhaling solvent vapors and paint mist. Never pour paint into sewers or drainage pipes.

This product is flammable. Keep away from open flames during storage and application, and smoking is strictly prohibited at the construction site. The product should be stored out of reach of children.

storage

at25°C for at least12months, after which it should be inspected before use. Store in a dry, ventilated, shaded area, away from fire and heat sources.

Note

The above materials and data are all based on laboratory tests and experimental experience. Due to individual circumstances (such as construction techniques, testing methods, or coating improvements), the data may vary.