Water-based Alkyd Rust-proof Paint

Water-based Alkyd Rust-proof Paint

Product Introduction:

A single-component coating composed of alkyd emulsion, anti-rust pigments, additives, deionized water, etc. %%Easy construction, excellent corrosion resistance, and can be directly diluted with clean water.Features such as easy construction, excellent corrosion resistance, and the ability to be directly diluted with clean water。

Applications:

Suitable forAgricultural machinery, automobiles,Instruments and meters、Industrial equipmentand otheritIndustrial products that are difficult to bakePrimer coating for rust prevention.

Technical Specifications:

Film Color                      Iron Red, Gray   

FlexibilitySex                        1Millimeter

Adhesion (Cross-cutTest)：             ≤1Grade

EnduranceSaltWater resistance (23±2℃）           ≥24hours

Dry Film Thickness                      20-30Micron

Theoretical spreading rate                    10-12Square meters/Kilograms,(At20Micron dry film thickness,Different colors have distinctions)

Drying Time                      Surface Dry,2hours

                              Action,12hours

Flash Point                          Non-flammable

Specific Gravity                          1.3+0.2Gram/Milliliter

Volatile Organic Compound Content(VOC)＜80Gram/Liter  

Construction Process:

1, Substrate Treatment

The construction surface must be clean, dry, and free of loose paint layers, grease, and othercontaminants.Avoid surface contamination by organic solvents, oils, acids, alkalis, salts, or mechanical impurities that may affect paint adhesion. After opening the paint can, thoroughly stir and pour into a mixing bucket, usingdeionized waterOr use tap water to clean the residual paint at the bottom of the can, then pour it together into the paint mixing bucket and addTap water or deionized waterAfter dilution, stir evenly and usemesh160mesh filter to spray after filtration. Dilute~200tionGood paint that hasn't been fully used must be covered with a lid to prevent the paint surface from drying out.DryCuring.

2Thinner

Clean tap water or deionized water

3, Painting environment

ConstructionWhen the steelplate surface's minimum temperature should notbelower than5℃, andSteelplate surface temperature mustbeat least above the dew point3℃ or higher.

The relative humidity should be lower than70%, otherwise the drying and recoating intervals will be significantly prolonged. Good ventilation around the object being coated is beneficial for the drying of the paint film.

4、Painting method   

• Air Spraying:Recommended,Air Spraying Application，If using equipment previously employed for solvent-based products, thoroughly flush the system with alcohol, then clean with water before applying the coating. For optimal edge protection and film thickness, air spraying is advised. Prior to spraying, ensure the paint is thoroughly mixed and diluted with purified water or clean tap water to achieve the desired viscosity as measured by a-4cup40~60Second construction, dilution rate is5-15%。

• Brush application：It is recommended to use multiple thin coats during application, as otherwise it may affect drying.

• Drying speed and levelingRollerCoating：Applicable-OnlyFor small surfacesAccumulationRepairPatchTypical thickness20-25μm

5、cleaning        

Tools must be washed immediately with clean water or warm soapy water after use.ConstructionRecommendationsDuring constructionProcessIn the process of...timeflushsprayCoatingequipment. cleaningFrequencydepends onspraycoating amount, temperature, andtime, including all interruptionstime。

Product compatibility:

Back-end supporting: water-based alkyd enamel, water-based alkyd blending paint, water-based special paint for steel structures

Safety Precautions:

Thisproductis designedOnlyfor industrialIndustry leaderin the domainprofessionalconstruction workerspersonnelin accordance with this manual, material safety data sheets, and the packaging container labelsGiveFixed constructionproposal toproceed with the work.

All work related to the construction and use of thisproductis carried outin accordance with safety,beHealthandEnvironmentalNational Standards inHygieneStandards and lawsRegulation advancementProceed.

If it is necessary to perform welding on metal coated with this productproduct%%%% (Note: The original text was highly fragmented with multiple line breaks and empty sections. The translation consolidates the meaningful segments into a single coherent sentence while preserving the original structure markers.)Contact or flame cutting mayproductgenerate powderdustand smokeFog, requiring the use of appropriate personal protectiveequipmentand adequate local ventilationmeasures.

Ifthere are doubtsThisproductabout the suitability of the productconcerns，Pleaseconsult with Baota Mountain Paint Companyfor inquiries。

Storage:

Storage Temperature0℃～35℃, sealedStore in a cool, dry, and well-ventilated place. Shelf life12months. If the shelf life is exceeded, it can still be used if it meets the standard requirements upon testing. When the temperature is below0℃effective anti-freezing measures should be taken.Do not expose to frost during storage and transportation.

Statement:

The information provided in this manual may not be exhaustive. If the product is used for purposes beyond those explicitly recommended in this manual without obtaining our company's prior written confirmation of its suitability, the responsibility lies solely with the user. While we strive to ensure that all recommendations regarding this product are accurate, the quality and condition of substrates, as well as numerous factors affecting the product's application and performance, are beyond our control. Therefore, unless we provide explicit written consent, we assume no liability for the product's performance or for any loss or damage (other than that caused by our negligence) resulting from its use. The content of this manual is subject to periodic updates based on practical experience and our company's ongoing product development policies.