Water-based Alkyd Primer

Water-based Alkyd Primer

Product Introduction:

is a single-component coating composed of water-based fast-drying alkyd emulsion, anti-rust pigments, additives, deionized water, etc.It featureseasy application, excellent anti-corrosion performance, and can be directly diluted with clean water.。

Purpose:

Suitable forAgricultural machinery、Automobile compartments、Steel structure pipelines、Industrial equipmentand itsItSome industrial products that are difficult to bakePrimer coating.

Technical Specifications:

Paint Film Colors                      Iron Red, Gray   

FlexibilitySex                        1Millimeter

Adhesion (Cross-cutTest：             ≤1Grade

EnduranceSaltWater resistance (23±2℃）           ≥24hours

Dry film thickness                      20-30Micron

Theoretical spreading rate                    7-10Square meters/Kilograms,(At25Dry film thickness in micrometers,Different colors have distinctions.)

Drying time                      Surface dry,2hours

                              Hard work,10hours

Flash point                          Non-flammable

Specific Gravity                          1.3+0.2Gram/Milliliter

Volatile Organic Compound Content(VOC)＜80Grams/Liters  

Construction Process:

1Substrate treatment

The construction surface must be clean, dry, free of loose paint layers, grease, and othercontaminants.Avoid organic solvents, oils, acids, alkalis, salts, and other mechanical impurities adhering to the surface, which may affect the adhesion of the paint film. After opening the paint can, it should be thoroughly stirred and poured into a mixing bucket, usingdeionized water.Rinse the remaining paint at the bottom of the can with water or tap water, pour it into the paint mixing bucket together, and addTap water or deionized waterAfter dilution, stir well and usemesh160mesh filter screen for filtration before spraying application. Thin~200outGood paint that hasn't been fully used must be covered with a lid to prevent the surface from drying.DryKnot.结。

2Thinner

Clean tap water or deionized water

3、Painting environment

ConstructionThe minimum surface temperature of the steelplate should notbelower than5°C, andSteelThe surface temperature of the plate mustbeat least above the dew point3℃ or higher.

The relative humidity should be below70%, otherwise the drying and recoating intervals will be significantly prolonged. Good ventilation around the object being coated is beneficial for the drying of the paint film.

4Coating Method  

• Air Spraying:Recommended,Air Spraying Application  If using equipment previously employed for solvent-based products, thoroughly flush the system with alcohol. Prior to coating application, clean with water. For optimal edge protection and film thickness, air spraying is advised. Before spraying, ensure the paint is thoroughly mixed and diluted with purified or clean tap water to...-4Cup40~60Instant construction, dilution ratio is5-15%。

• Brush coating：It is recommended to apply multiple thin coats during construction, otherwise it may affect drying.

• Drying speed and levelingRollerCoating：Applicable-OnlyFor small surfacesAccumulationRepairReplenishmentTypical Thickness20-25μm

5、cleaning     

Tools must be immediately washed with clean water or warm soapy water after use.Constructionsuggestions durin %%The process is also certainTimeRinseSprayCoatingEquipment. Cleaningfrequencydepends onSpraycoating amount, temperature, andtime, including all interruptionstime。

Product Compatibility:

Downstream Supporting Products: Water-based alkyd enamel, water-based alkyd paint, water-based steel structure specialized paint

Safety Precautions:

Thisproductis designedOnlyfor industrialIndustry leaderIn the fieldProfessionalConstruction personnel%% Follow this manual, material safety data sheets, and the instructions on the packaging containersGiveproposed constructionwork toproceed.

All work related to the construction and use of thisproductis carried outin accordance with safety,beHealthandEnvironmentalProtection-related nationalstandardsStandards and LawsRegulationsProceed.

If it is necessary to apply on metal coated with thisproduct,toproceedWeldContact or flame cutting may produceproductdustandsmokefumesUse appropriate personal protectiveequipmentand ensure adequate local ventilationmeasures.

iftherearedoubtsabout the suitability of this productConsider，PleaseInquire with Baota Mountain Paint Companyfor information。

Storage:

Storage Temperature0℃～35℃, sealedStore in a cool, dry, and well-ventilated place. Shelf life12months. If the shelf life is exceeded, it can still be used if it meets the standard requirements upon testing. When the temperature is below0℃%, effective anti-freezing measures should be taken.During storage and transportation, do not expose to frost.

Disclaimer:

The information provided in this manual may not be exhaustive. If you use this product for purposes beyond those explicitly recommended in this manual without obtaining prior written confirmation from our company regarding its suitability, you assume full responsibility. While we strive to ensure that all recommendations provided regarding this product are accurate, the quality and condition of the substrate, as well as numerous factors influencing the application and use of this product, are beyond our control. Therefore, unless we provide explicit written consent, we assume no responsibility for product performance or any losses or damages (except those caused by our negligence) resulting from the use of this product. The information in this manual will be revised periodically based on practical experience and our company's ongoing product development policy.