Epoxy Intermediate Paint for Containers (Two-component)

Epoxy Intermediate Paint for Containers (Two-component)

Product Overview:

Epoxy intermediate paint for containers is a two-component coating formulated from epoxy resin, anti-corrosion pigments, additives, organic solvents, and curing agents. This product features excellent adhesion and superior anti-corrosion properties, making it suitable for painting container surfaces.

Construction Reference:

Surface Preparation——All surfaces to be painted should be clean, dry, and free from contaminants. The surfaces should be evaluated and treated according to the international standard ISO8504.

Steel surfaces with shop primer must be clean, dry, and intact.

Dust Removal——Loose dust can be removed using a compressed air gun or by sweeping with a clean brush.

Old paint film treatment – Use a scraper to remove and then fill and sand smooth, or employ other methods as appropriate.

Grease Treatment – First remove or treat with a thinner or other method, then wipe clean with a clean cloth. If conditions permit, wash with dilute acid first, rinse with clean water, and then air-dry or oven-dry.

Construction Environment – The substrate temperature should be between 5°C and 40°C. When painting in enclosed spaces, ensure good ventilation to allow proper drying of the paint film. Avoid exposure to hot air before solvents have completely evaporated from the paint film to prevent surface skinning and solvent retention. Do not subject the coating to external forces until fully cured.

Mixing Ratio – Follow the specified ratio indicated on the packaging.

Construction Method - Air spraying or airless spraying. If special application methods (such as high-pressure airless spraying or roller coating) are used, it should be specified in advance. The company will adjust the formulation accordingly for special methods.

Dilution ratio—Generally 10-30% of the paint volume used.

Gelation time - 23°C, 6 hours (shortens with increasing temperature).

Curing time - Thoroughly mix components A and B in the specified ratio, then allow to cure for 30 minutes before use.

Spray gun pressure - 4-6 kg

Tool cleaning - Use the matching thinner

Recommended matching products:

Epoxy intermediate paint for containers 40Micron(Dry film thickness)
Optional top coatings: such as epoxy paint, polyurethane paint, etc.

Other supporting measures can be formulated based on specific circumstances.

Health and Safety:

To avoid skin and eye contact with paint, wear protective clothing, gloves, goggles, and masks before construction. If paint splashes on the skin, wash immediately with warm water, soapy water, or other appropriate cleaners. If paint gets into the eyes, rinse thoroughly with plenty of water and seek medical attention promptly.

The construction site should be well-ventilated. When spraying, wear an air mask to prevent inhaling solvent vapors and paint mist. Never pour paint into sewers or drainage pipes.

This product is flammable. Keep away from open flames during storage and construction. Smoking is strictly prohibited at the construction site. Store the product out of reach of children.

Storage:

Ata temperature of 25°C, it can be stored for at least 12 months, after which it should be inspected before use. Store in a dry, ventilated, shaded area, away from fire and heat sources.

Remarks:

The above information and data are based on laboratory tests and experimental experience. Due to individual circumstances (such as construction techniques, testing methods, or coating improvements, etc.), the data may vary.