Epoxy Anti-corrosion Powder Coating Specialized for Fire Pipes

Product Introduction:

This product is made using linear phenolic epoxy resin, polyurethane-modified epoxy resin, and a new curing agent,featuring high reactivity, strong adhesion, high crosslinking density, and a coating film with excellentchemicalresistance, solvent resistance, cathodic disbondment resistance, impact resistance, high-temperature resistance, andother outstanding properties.

Product Applications:

Internal and external anti-corrosion coating for water supply pipelines in fire protection systems.

Product Features:

1. Excellent adhesion to the substrate material;

2. It possesses excellentcorrosion resistance;

3. Smooth surface finish, high gloss, and dense coating structure;4. Superior resistance to high-temperature cathodic disbondment;

5. Highly flexible, capable of being flattened through 4/5 compression and rear pressure grooves.

6. Excellent high and low temperature resistance;

7. The coating exhibits strong resistance to boiling water.

Powder Properties:

Powder Coating Performance Parameters

Performance parameters of the powder coating film after curing

Implementation Standards:

GB/T 5135.20-2010 "Coated Steel Pipes for Automatic Sprinkler Systems'; CJ/T 120-2008 "Plastic-Coated CompositeSteel Pipes for Water Supply"

Curing conditions:

Note: The recommended curing conditions refer to the workpiece temperature; deviations above or below thespecified temperature will affect the coating's performance or prevent it from being fully realized. Medium-frequencyheating curing or other heating methods can be used for curing.

Construction parameters:

1. Applicable equipment-friction electrification spraying, corona electrostatic spraying, dip coating, and otherprocesses

2. Coating thickness - Adjustable between 150 ~ 450um according to workpiece requirements

Health and Safety:

1. This product is non-toxic and non-flammable, but please comply with the GB15607-1995 safety regulations forpaint coating operations during use.

Precautions:

1. This product is not recommended for outdoor use, as it may cause fading and powdering phenomena. %% 2. Thesteel pipe surface should be free of oil stains and moisture, with surface treatment quality reaching Sa23 gradeGB/T8923). The roughness depth should be 40-100 um, and any dust or abrasive particles on the steel pipe surfaceshould be thoroughly blown clean. %% 3. Preheating: The temperature should be controlled between 180-240°C.

2. The steel pipe surface shall be free of oil stains and moisture, with surface treatment quality reaching Sa21/2 grade(GB/T8923). The anchor patter depth should be 40~100 um, and dust and abrasive particles attached to the pipesurface shall be thoroughly blown clean.

3. Preheating: Temperature should be controlled between 180~240°C.

4. Powder products should be stored indoors in a well-ventilated, dry environment with temperatures below 30°C,away from heat sources, corrosive chemicals, and chemical solvents, and protected from strong light exposure. Themaximum stacking height should not exceed 4 layers. Avoid prolonged pressure to ensure the packaging remainssealed, preventing clumping and moisture absorption, which could affect fluidization performance.

5. To ensure thorough curing of the epoxy coating and maximize its anti-corrosion performance, it is recommendedto preheat the steel pipe surface to a temperature above 200°C, which significantly improves the curing completionrate.