BTS-P601 Indoor Polyurethane Marking Paint
Product Introduction:
Baotashan BrandBTS-P601 Indoor Polyurethane Marking Paintis a type of hydroxyl resin,High-quality pigments, wear-resistant fillers, additives, curing agents, etc.A two-component coating formulated by mixing.
Product Performance:
PaintThe film exhibits excellent dustproof, waterproof, and wear-resistant properties.
Recommended Applications:
Applicablefor indoor two-component resin floor markings without UV exposure.
Not for use in outdoor areas exposed to UV radiation.
Technical Guide：
Project | Component | Component |
Usage time | 4.0Hour(s)10℃） | 3.0Hour(s)23℃） | 2.0Hour(s)30℃） |
Curing Time | Surface Dry45min（10℃） | 30min（23℃） | 25min（30℃） |
Practical work12Hour(s)10℃） | 10Hour(s)23℃） | 8Hour(s)30℃） |
Specific gravity | 1.2-1.4 | 1.0 |
Color | Various colored viscous liquids | colorless transparent liquid |
Mixing ratio | Component/BComponent=100:25 |
|
Solid content | 60%Above (after mixing) |
|
Construction Instructions：
Mix—— Pour component A and component B into the mixing bucket proportionally and stir thoroughly, then add the matching thinner to achieve the desired application viscosity.Pour components A and B into the mixing bucket and stir thoroughly until well mixed, then add the matching thinner to reach the desired application viscosity.
Application Method—— Roller coating, Spraying
Recommended Usage—— 1kg can cover 25-30 meters of 15cm wide solid lines on resin flooring
Construction Conditions—— SubstrateMoisture Content RequirementsBelow 8%, with relative air humidity under 80%. Avoid construction during rainy days, when relative air humidity exceeds 80%, or when temperatures are below 5°C.℃Below, construction should be avoided.
Mixing ratio—— Follow the proportion indicated on the packaging. Prepare the mixture as needed, using only the required amount, and stir thoroughly until uniform. Use it within the specified time frame to avoid gel waste.
Dilution ratio—— 10-15%Special thinner
Tool Cleaning—— Matching Thinner
Recommended matching system:
Our company's various multi-component resin floor paints+BTS-P601 Indoor Polyurethane Marking Paint
Storage：
Must be stored in accordance with national regulations. The storage environment should be dry, cool, well-ventilated, and away from heat sources and open flames. Containers must remain tightly sealed.
Storage：
Ata temperature of 25°C, it can be stored for at least 12 months. Store in the original sealed container, keeping the storage area cool and dry. Prevent containers from freezing. Storage temperature must not fall below5℃。
Loading and unloading:
Handle with care. Stir well before use.
Packing Specifications:
Component (Base Material)：20KilogramComponent (Curing Agent)5Kilogram
Health and Safety:
Pay attention to the warning labels on the packaging container. Use under well-ventilated conditions. Avoid swallowing or inhaling paint mist. Prevent skin contact; if paint splashes onto the skin, wash immediately with appropriate cleaner, soap, and water. In case of eye contact, rinse thoroughly with clean water.Wash.
Statement：
The information provided in this product manual is entirely based on the knowledge we have obtained through laboratory and practical experience. However, since product usage typically occurs outside our control, we only guarantee the quality of the product itself. We reserve the right to modify this manual without prior notice.
English
Pусский
简体中文
